Introduction: As AI chips exceed 1,000 W, cooling is becoming a physical constraint on computing performance.
On November 19, 2026, Nanjixiong learned that Suzhou Beifeng Intelligent Technology Co., Ltd. was showing a complete pure-copper printing solution at Formnext, combining its own copper powder, infrared-laser equipment and turnkey processes for AI data-center liquid cooling.
Copper printing and AI liquid cooling
AI data centers, supercomputing and high-power semiconductors represent a market on the trillion-yuan scale. New processors and flagship GPUs with thermal design power above 1,000 W are pushing conventional air cooling and machined heat sinks toward their limits.
Planar channels provide limited heat-transfer area for extreme heat flux. Brazed multipart assemblies introduce thermal contact resistance and potential leakage, posing challenges for data centers operating continuously under heavy loads.
The article reports that printed pure-copper liquid cooling components can incorporate three-dimensional microchannels below 0.1 mm, eliminate weld seams, increase effective heat-transfer area by more than 200% and overall heat-transfer efficiency by over 50%. It also reports more than 30% lower flow resistance and potential support for power usage effectiveness (PUE) approaching 1.1.
An infrared copper production solution
Copper's high near-infrared reflectivity and thermal conductivity have encouraged the use of expensive green lasers. Equipment and operating costs can constrain wider adoption.
Beifeng says its powder metallurgy and laser-energy coupling expertise enables direct, high-density pure-copper printing with industrial infrared lasers.
• Up to 90% lower total manufacturing cost compared with conventional green-laser copper printing, according to the company.
• Thermal conductivity ≥380 W/(m·K). Its atomized powder has high sphericity and low oxygen. Printed relative density exceeds 99.9%, with thermal conductivity ≥380 W/(m·K) and leak-tight performance. The company presents this as meeting demanding pure-copper manufacturing requirements.
• Annual powder capacity of 2,000 tonnes. Its own copper powder, equipment covering a range of build sizes and turnkey process packages form an end-to-end offering intended to match global AI infrastructure demand.
Formnext applications
The portfolio targets precision liquid cooling, electric vehicle drives and semiconductor thermal management. Beifeng invites data-center partners, thermal solution providers and industry visitors to see pure-copper samples and discuss customized production for high-density computing.
AI-translated from an article by Xiaoruanxiong on Nanjixiong, originally published on 2026-11-19. Text and images retain the original source attribution.
Read the original Chinese article |