All Voice of China 3D Printing

标题: Beifeng Intelligent Brings Infrared-Laser Copper Printing to Formnext 2026 [打印本页]

作者: admin    时间: 2026-11-19 20:10
标题: Beifeng Intelligent Brings Infrared-Laser Copper Printing to Formnext 2026
Introduction: As AI chips exceed 1,000 W, cooling is becoming a physical constraint on computing performance.

On November 19, 2026, Nanjixiong learned that Suzhou Beifeng Intelligent Technology Co., Ltd. was showing a complete pure-copper printing solution at Formnext, combining its own copper powder, infrared-laser equipment and turnkey processes for AI data-center liquid cooling.

(, 下载次数: 0)

Copper printing and AI liquid cooling
AI data centers, supercomputing and high-power semiconductors represent a market on the trillion-yuan scale. New processors and flagship GPUs with thermal design power above 1,000 W are pushing conventional air cooling and machined heat sinks toward their limits.

(, 下载次数: 0)

Planar channels provide limited heat-transfer area for extreme heat flux. Brazed multipart assemblies introduce thermal contact resistance and potential leakage, posing challenges for data centers operating continuously under heavy loads.

(, 下载次数: 0)

The article reports that printed pure-copper liquid cooling components can incorporate three-dimensional microchannels below 0.1 mm, eliminate weld seams, increase effective heat-transfer area by more than 200% and overall heat-transfer efficiency by over 50%. It also reports more than 30% lower flow resistance and potential support for power usage effectiveness (PUE) approaching 1.1.

(, 下载次数: 0)

An infrared copper production solution
Copper's high near-infrared reflectivity and thermal conductivity have encouraged the use of expensive green lasers. Equipment and operating costs can constrain wider adoption.

(, 下载次数: 0)

Beifeng says its powder metallurgy and laser-energy coupling expertise enables direct, high-density pure-copper printing with industrial infrared lasers.

• Up to 90% lower total manufacturing cost compared with conventional green-laser copper printing, according to the company.
• Thermal conductivity ≥380 W/(m·K). Its atomized powder has high sphericity and low oxygen. Printed relative density exceeds 99.9%, with thermal conductivity ≥380 W/(m·K) and leak-tight performance. The company presents this as meeting demanding pure-copper manufacturing requirements.
• Annual powder capacity of 2,000 tonnes. Its own copper powder, equipment covering a range of build sizes and turnkey process packages form an end-to-end offering intended to match global AI infrastructure demand.

Formnext applications
The portfolio targets precision liquid cooling, electric vehicle drives and semiconductor thermal management. Beifeng invites data-center partners, thermal solution providers and industry visitors to see pure-copper samples and discuss customized production for high-density computing.

(, 下载次数: 0)

AI-translated from an article by Xiaoruanxiong on Nanjixiong, originally published on 2026-11-19. Text and images retain the original source attribution.
Read the original Chinese article




欢迎光临 All Voice of China 3D Printing (https://www.panda3dp.com/) Powered by Discuz! X3.5