标题: Raise3D Expands RMS220 SLS Build Volume by 30% and Introduces B520 Automated Blasting [打印本页] 作者: admin 时间: 2026-11-18 20:02 标题: Raise3D Expands RMS220 SLS Build Volume by 30% and Introduces B520 Automated Blasting Introduction: Formnext 2026, the world's largest 3D printing exhibition, opened yesterday in Germany, where Nanjixiong saw many new products.
On November 18, 2026, Nanjixiong learned that Raise3D was showing its new large-format T450 and T700 FFF printers in Frankfurt, along with two SLS updates: the RMS220's expanded Z height increases build volume from about 17 L to 21.8 L, roughly 30%, and the new compact B520 automated blasting machine supports post-processing for other brands' polymer powder bed systems as well.
(, 下载次数: 0)
上传
点击文件名下载附件
More room for larger and more numerous parts
European service providers and in-house printing centers often favor flexible small SLS systems. Energy costs and smaller workloads can make large powder systems less practical, with longer waits to fill a batch. More than a year after launch, the RMS220 has become popular among small SLS systems. Users asked whether software could increase usable build space within the same chamber.
Raise3D has expanded the effective envelope from 220 × 220 × 350 mm to 220 × 220 × 450 mm through software algorithms. The unchanged XY dimensions and extra 100 mm in Z increase volume from approximately 17 L to 21.8 L, about 30%.
(, 下载次数: 0)
上传
点击文件名下载附件
RMS220 build height increases to 450 mm.
ideaMaker 5.6.0 was released November 17, 2026. Eligible existing RMS220 machines can gain the expanded volume through software without additional hardware or physical modification, making taller parts possible.
(, 下载次数: 0)
上传
点击文件名下载附件
RMS220 SLS printer with a 220 × 220 × 450 mm envelope.
(, 下载次数: 0)
上传
点击文件名下载附件
A 450 mm tall vehicle lamp housing printed on the RMS220.
The software expansion provides more manufacturing flexibility using the existing hardware.
For a specification reference, the following chart compares published dimensions and laser specifications for the Raise3D RMS220, Fuse 1+ 30W, EOS FORMIGA P 110 Velocis and Sinterit Lisa X. Their configurations and target uses differ. The chart is not a market ranking.
(, 下载次数: 0)
上传
点击文件名下载附件
Build volumes are calculated from the three dimensions and converted to liters. They do not represent actual printable part volume or output.
B520: a standalone automated blasting system
Cleaning and finishing are important parts of polymer powder bed production. Raise3D presented the B520 for different equipment and production environments.
It works with suitable polymer parts from the RMS220 and third-party SLS, MJF, SAF and HSS systems, reducing manual blasting work.
The enclosed workstation integrates automated blasting, air cleaning and ionized static removal, using preset programs for compatible batches. Manual mode can finish deep grooves and shielded areas the automated process cannot fully reach.
(, 下载次数: 0)
上传
点击文件名下载附件
Raise3D B520 automated blasting system.
The standard basket has 24.8 L internal capacity and the large basket 75.5 L. An optional polishing module accommodates further finishing needs.
The standalone design offers post-processing for mixed-brand production environments, with processes selected for part geometry and production requirements.
An expanded printing and post-processing portfolio
The RMS220's added Z space supports taller one-piece parts and different nesting arrangements. The B520 combines automated and manual blasting for flexible cleaning and finishing. Together they help users plan workflows around their parts, equipment and production requirements.
(, 下载次数: 0)
上传
点击文件名下载附件
SLS printing and post-processing workflow.
Learn more and request samples
Contact Raise3D or request an SLS demonstration to discuss the expanded RMS220 envelope, ideaMaker update and B520's suitability for your application. Scan the code for an SLS sample request.
(, 下载次数: 0)
上传
点击文件名下载附件
Scan to request SLS sample printing.
Raise3D Technology Open Day
Raise3D will hold an open day in Shanghai's Yangpu District on November 26, 2026. Talks cover large-format high-speed FFF, materials and PEEK processing, with discussion of the T series. SLS sessions cover blasting and new materials, connecting printing and finishing.
One-to-one discussions with technical specialists will address equipment selection, materials and process optimization. Scan the code to register.
(, 下载次数: 0)
上传
点击文件名下载附件
Scan to register for Raise3D Technology Open Day.
AI-translated from an article by Xiaoruanxiong on Nanjixiong, originally published on 2026-11-18. Text and images retain the original source attribution. Read the original Chinese article
欢迎光临 All Voice of China 3D Printing (https://www.panda3dp.com/)