标题: Xihe Additive Shows Full-Plate Copper Optical-Module Cold Plates at Formnext 2026 [打印本页] 作者: admin 时间: 2026-11-18 20:01 标题: Xihe Additive Shows Full-Plate Copper Optical-Module Cold Plates at Formnext 2026 Nanjixiong introduction: AI computing is pushing cooling toward the 1,000 W power class. Optical modules and liquid cooling plates increasingly need complex pure-copper channels. Green-laser copper printing offers a manufacturing approach for those geometries.
At Formnext's opening in Frankfurt on November 17, 2026, Xihe Additive showed green-laser metal printed samples and its core green fiber laser source, emphasizing the transition from process development to batch production.
(, 下载次数: 0)
上传
点击文件名下载附件
Copper absorption rises from about 5% to 40%
Copper absorbs only 4–5% of 1,064 nm infrared laser light, compared with about 40% at green wavelengths of 515–532 nm, nearly an order of magnitude higher. At equal power, more energy couples into the material, supporting stable melt pools, less spatter and higher density.
(, 下载次数: 0)
上传
点击文件名下载附件
Xihe's parent, Gongda Laser, develops green fiber lasers in-house. This gives Xihe capabilities across laser sources, optics, complete machines and applications, an advantage in copper processing where source stability matters.
A more compact M350 series for production
The updated M350G uses an in-house 532 nm single-mode continuous-wave green fiber laser, with 500 W or 1,000 W power and a 350 × 350 × 550 mm build volume. It targets reflective, refractory and light metals.
(, 下载次数: 0)
上传
点击文件名下载附件
The upgrade reduces machine footprint to offer more flexible factory layouts. As copper printing moves into production, machines need to fit production lines and run continuously.
(, 下载次数: 0)
上传
点击文件名下载附件
Previously disclosed figures include pure-copper part density up to 99.9%, electrical conductivity of 101.5% IACS and Ra surface roughness of 6–10 μm. Conductivity and density are important for optical-module cold plates and IGBT thermal substrates.
Applications from cooling structures to dissimilar materials
Exhibits span thermal management, electrical and induction heating applications, and aerospace, including conductive pure-copper cooling structures, complex TPMS geometries, microchannel cold plates, precision functional components and dissimilar-material samples.
(, 下载次数: 0)
上传
点击文件名下载附件
Continuous TPMS surfaces and thin walls require control of laser spot and heat input. Microchannel cold plates address AI server and optical-module cooling. A previously shared pure-copper cold plate had a minimum wall thickness of 0.5 mm, withstood 8 MPa and showed no leakage in water testing.
(, 下载次数: 0)
上传
点击文件名下载附件
Full-plate cold plates demonstrate batch output
A prominent first-day exhibit was a full plate of optical-module cold plates made on an M350 in one build. Such output requires stable long-duration operation, consistent forming across the build area, reliable powder circulation and atmosphere control.
(, 下载次数: 0)
上传
点击文件名下载附件
Customer discussions focused on consistency, throughput and process maturity. Customers with specific products and capacity needs wanted to know whether copper parts could be made reliably in batches. Xihe's printing service also attracted inquiries about material compatibility, parts and production.
(, 下载次数: 1)
上传
点击文件名下载附件
(, 下载次数: 0)
上传
点击文件名下载附件
Nanjixiong's observations
A November 2026 Huafu Securities report anticipated green-laser printing moving from samples and small batches to mass production as demand for conductive copper grows in optical modules, commercial spaceflight, humanoid robots and AI liquid cooling.
Many current solutions remain in trials. Long continuous operation, batch consistency and acceptable unit costs are further requirements. Xihe emphasized full-plate output, production-line fit and equipment improvements for reliable manufacturing.
Its in-house laser source, smaller footprint and batch demonstrations connect optical technology with an integrated production capability. Growing copper cooling demand will require stable, fast and economical manufacturing.
AI-translated from an article by Xiaoruanxiong on Nanjixiong, originally published on 2026-11-18. Text and images retain the original source attribution. Read the original Chinese article
欢迎光临 All Voice of China 3D Printing (https://www.panda3dp.com/)