All Voice of China 3D Printing

标题: eSUN's Yang Yihu at Formnext: Distributed 3D Printing Moves from Toys to Shoes [打印本页]

作者: admin    时间: 2026-11-18 08:00
标题: eSUN's Yang Yihu at Formnext: Distributed 3D Printing Moves from Toys to Shoes
On the morning of November 17, 2026, Nanjixiong visited eSUN's booth F01 in Hall 12.1 at Formnext in Germany and spoke with founder and chairman Yang Yihu and product managers. eSUN is a brand of Shenzhen Esun Industrial Co., Ltd., founded in 2002 and listed on China's National Equities Exchange and Quotations in April 2016 (836514). The company entered 3D printing materials around 2006 and launched its first consumer biobased PLA filament in 2007. It sells to more than 100 countries. Its iSUN3D subsidiary handles photopolymer resins and customized footwear solutions.

More than a decade exhibiting, from EuroMold to Formnext
Yang recalled exhibiting at EuroMold, the injection-molding event that preceded Formnext, more than ten years ago. Apart from a one- or two-year interruption during the pandemic, eSUN has attended almost every year, expanding from a standard stand to a custom booth.

On the growing Chinese presence, he said a country of 1.4 billion people would naturally have many companies. Participation, competition and cooperation all help expand an industry.

Three stages and two directions
Yang divided 3D printing's development into three stages. For about twenty years before 2006, patents restricted it largely to commercial use by big companies. Patent expirations and open source then brought it into DIY and maker communities. After 2023, machines from companies such as Bambu Lab opened the consumer market.

He sees two directions today. Consumer use is reaching households, and he expects another five to ten years of rapid growth. He estimates penetration at a few per thousand, with potential eventually to reach 10% or 20%. The other direction is manufacturing, from aerospace and healthcare to global dentistry after the pandemic and, more recently, toys.

After toys, footwear
Traditional toy manufacturing is centralized, standardized and labor-intensive, shipping products around the world from large factories. Printing allows distributed, personalized manufacturing. Household and small-business print farms have proliferated in Europe and North America. Yang said one unnamed customer operates thousands of printers and produced toys worth over RMB 100 million last year with attractive gross margins.

Printing removes tooling requirements and accelerates iteration, bringing personalized and local manufacturing to markets traditionally served by standardized centralized factories. Yang expects footwear to follow. As soft, resilient materials mature, distributed farms could make personalized shoes across Europe and North America.

A new distributed customization platform
At the show, eSUN launched a platform open to designers worldwide. The name was given verbally as “Natives.” A designer uploads a design, and a customer order in the United States is manufactured and delivered by a local partner. The same model applies to London and other markets. The name is recorded as spoken. Its spelling and domain remain unconfirmed, and the official pre-show exhibit list did not name it.

The associated workflow covers scanning, plantar-pressure measurement, customization and production using flexible materials. eSUN is seeking partners worldwide for a shared distributed customization network.

Coffee, recycled materials, no-drying PETG and high-speed PLA
A product manager showed several consumer materials emphasizing recycling and sustainability.

• PLA-Coffee combines recovered coffee grounds with PLA and releases a coffee aroma during printing. Plant fibers can absorb moisture, clog nozzles and cause stringing. eSUN incorporates the fibers into PLA to improve printability. Public reports say it was developed with Yum! Brands.
• PLA-Revive is mechanically recycled PLA. Scrap from eSUN's own production is crushed, pelletized and made into filament again, with traceable composition.
• rPETG uses chemical recycling by depolymerization and repolymerization. The website lists recycled purity of at least 99% and certifications including GRS.
• PETG 2.0, a featured new product, is intended to print without predrying. Staff said it maintained first-day print quality after five days open and performed well after fifteen days, with precision approaching PLA. The name is recorded from the interview and had not been found on public product pages.
• Ultra-high-speed PLA, officially PLA-HF, is intended for stable printing at 600 mm/s and up to 1,000 mm/s in extreme mode, targeting print-farm productivity.

The booth also featured clear, matte, silk and photochromic materials for toys, plus a designer's PLA interpretation of The Starry Night.

Engineering materials and humanoid robots
Engineering materials included carbon-fiber-reinforced, antistatic, lightweight foamed, flame-retardant, heat-resistant and medical grades based on ABS, TPU, PET and nylon.

A humanoid robot demonstrated different materials by function. According to staff, flexible areas used a one-component elastomer, the shells used PLA and ABS, and joints used PA6-CF and PPS-CF. The shoes were printed with flexible resin available in different hardnesses.

Flexible footwear and FlexOne 65
The footwear area featured FlexOne 65, a one-component elastic resin with Shore A 65 hardness. It offers flexibility, support and resilience for comfortable footwear. Other samples combined printed one-component elastic soles with traditional leather uppers to balance cushioning and fit.

Quality, competition and standards
Yang said a fast-growing industry naturally attracts participants of varying quality. Products and service ultimately determine survival. Poor-quality competition may dominate in particular places or periods, but he expects market dynamics to support healthier development over time.

Public information says eSUN led ISO 5425:2023 on specifications for PLA-based filament for additive manufacturing, described as the first international standard for 3D printing materials, and led or contributed to several Chinese PLA filament standards. Yang said eSUN was among China's early PLA filament producers. He recalled bringing Bambu Lab's first machine to the exhibition in 2022 when the company did not yet have its own booth.

Nanjixiong's observations
eSUN is expanding from filament into engineering materials for robotics, new energy vehicles and low-altitude aviation, and into distributed footwear customization and consumer aesthetic materials. Materials companies are extending into solutions and platforms in both desktop and industrial markets. Delivery data will show whether the verbally named Natives platform connects overseas designers and local manufacturers effectively, and whether flexible footwear printing scales like toy farms.

AI-translated from an article by Kuaixiong on Nanjixiong, originally published on 2026-11-17. Text and images retain the original source attribution.
Read the original Chinese article




欢迎光临 All Voice of China 3D Printing (https://www.panda3dp.com/) Powered by Discuz! X3.5