标题: China's 3D Printing Equipment Output Rose 85.9% Year Over Year in October 2026 [打印本页] 作者: admin 时间: 2026-11-16 20:05 标题: China's 3D Printing Equipment Output Rose 85.9% Year Over Year in October 2026 Nanjixiong introduction: China's industrial value added at enterprises above designated size rose 4.8% year over year in October. Production of 3D printing equipment rose 85.9%, far outpacing industry overall. Year-to-date growth increased from 52.3% in January–July to 64.6% in January–October. National 3D printer exports by value rose 104.8% in the first ten months, while Shenzhen exported RMB 14.62 billion, up 116.6%. Domestic output and exports both grew.
(, 下载次数: 0)
上传
点击文件名下载附件
On November 16, 2026, Nanjixiong learned that China's National Bureau of Statistics had released October industrial production figures for enterprises above designated size. Output of 3D printing equipment, lithium-ion batteries and industrial robots increased 85.9%, 30.0% and 26.0% year over year, respectively. 3D printing equipment continued to lead these high-growth industrial products.
(, 下载次数: 0)
上传
点击文件名下载附件
Year-to-date output growth increases, with October at 85.9%
Reported year-over-year growth rates for 3D printing equipment were:
• January–July: 52.3%, compared with 40.2% for lithium-ion batteries and 28.5% for industrial robots.
• First three quarters: 62.5%.
• January–October: 64.6%, according to the November 16 State Council Information Office press conference. Industrial robot output rose 32.3% over the same period.
• October alone: 85.9%.
On this trajectory, 2026 3D printer output could reach 8.5 million units.
(, 下载次数: 0)
上传
点击文件名下载附件
Nine months of exports exceed all of 2025
Rapid production growth has accompanied overseas orders. General Administration of Customs data for tariff heading 8485 show:
• In the first seven months, China exported 4.21 million 3D printers, up 89.9%, worth RMB 11.196 billion, up 106.6%.
• In the first three quarters, exports of 3D printing equipment and parts totaled RMB 17.230 billion. Plastic and rubber additive manufacturing equipment (consumer desktop machines) accounted for 5.9215 million units and RMB 14.518 billion. Metal additive manufacturing equipment accounted for 1,138 units and RMB 507 million. On the broader measure, nine-month export volume and value exceeded all of 2025 (4.49 million units and RMB 13.15 billion).
• In January–October, national 3D printer export value rose 104.8% year over year, while industrial robot exports rose 17.8%.
Exports are geographically concentrated. In the first three quarters, Guangdong exported RMB 13.2 billion in 3D printers, up 113.3% and accounting for more than 80% of comparable national exports.
Shenzhen is a major production center. Its equipment output rose 77.8% in the first three quarters. It exported RMB 14.62 billion in 3D printers in the first ten months, up 116.6%. Exports to other APEC economies were RMB 7.62 billion, up 119.6%.
Nanjixiong's observations
Consumer desktop printers drive unit volumes, while industrial metal machines and parts contribute some of the value. The industry is concentrated in the Pearl River Delta, especially Shenzhen. Overseas orders and growth in domestic uses are both factors in October's 85.9% output increase. The production figures do not distinguish domestic sales from exports, so their respective shares will require company order data and subsequent monthly export reports.
AI-translated from an article by Beijixiong on Nanjixiong, originally published on 2026-11-16. Text and images retain the original source attribution. Read the original Chinese article
欢迎光临 All Voice of China 3D Printing (https://www.panda3dp.com/)