标题: Reissued Public Tender: Flexible Circuit 3D Printer (Budget: RMB 2.55 Million) [打印本页] 作者: admin 时间: 2026-10-31 20:10 标题: Reissued Public Tender: Flexible Circuit 3D Printer (Budget: RMB 2.55 Million) 1. Project details
Project number: 0613-267128055560
Project: ZYCGR22011903 flexible circuit 3D printer
Budget and maximum price: RMB 2.55 million
Requirement: One flexible circuit 3D printer capable of picoliter droplet output and micro/nanoscale pattern printing with low-viscosity biological reagents and high-viscosity pastes. Two quickly interchangeable heads must support high-resolution pneumatic extrusion direct writing and ultra-low-volume piezoelectric inkjet printing. The system will support micro/nanoscale functional-device R&D and prototyping through maskless direct writing of functional materials including nanosilver paste, dielectrics, and sensor materials. It must support high-viscosity paste printing, multilayer stacking, and interconnect structures with vertical spans of at least 300 μm, on rigid and flexible substrates including silicon wafers, glass, PI, and PET.
Delivery: Within six months after contract signing and receipt of the purchaser's notice. Consortium bids and imported products are not accepted.
2. Tender documents
Available October 28–November 4, 2026, 09:00–11:30 and 13:30–16:00 Beijing time, excluding statutory holidays. Register on the SMEETC electronic trading platform through www.shbid.com to participate.
Price: RMB 500.
3. Bid deadline and opening
Deadline and opening: November 18, 2026, 10:00 Beijing time.
Location: Conference room, 11th floor, Hengda Building, 285 Changshou Road, Shanghai.
4. Additional information
The tender was reissued because of major technical changes. Previously registered suppliers do not need to register again.
AI-translated from an article by Kuaixiong on Nanjixiong, originally published on 2026-10-30. Text and images retain the original source attribution. Read the original Chinese article
欢迎光临 All Voice of China 3D Printing (https://www.panda3dp.com/)