All Voice of China 3D Printing

标题: Dental Metal 3D Printer, Chamlion铖联科技 [打印本页]

作者: JohnJK 时间: 2024-8-8 10:44
标题: Dental Metal 3D Printer, Chamlion铖联科技
本帖最后由 JohnJK 于 2024-8-8 10:48 编辑

As a national high-tech enterprise supported by the Additive Manufacturing Institute of Nanjing University of Aeronautics and Astronautics, Chamlion focuses on one-stop dental 3Dprinting digital solutions, and leads the digital trans-formation and modernization of dentistry.
Chamlion has a deep understanding of the field of dentistry. With its deep understanding of the industry and rich experience in product development, Chamlion has successively developed products such as dental-specific 3D printers with independent IP rights, dental intelligent design software and post-processing equipment, realizing the digitization of the entire industry chain. Based on Internet”+ 3D printing, the company has built a large-scale distributed dental manufacturing cloud factory around the world, and we have opened up the data-design-manufacturing process, and built a digital service platform for the entire dental process.

Dental Special Metal 3D Printer NCL M180A

(, 下载次数: 25)

•Large print area of 180mm: Capable of printing over 30 partial frameworks and 330 crowns in a single run (actual quantity varies depending on layout and layer thickness).
•Equipped with a mobile powder station for automated powder recycling, reducing powder spreading time and improving printing efficiency.
•Bidirectional powder spreading: Shorter powder spreading distance in a single cylinder, greatly enhancing printing efficiency.
•Optimized filter system structure: Enhanced back-blow effect, improved filter lifespan, and powder utilization, making it easier to replace filters and clean the box.
(, 下载次数: 16)

△180mm vs 150mm

Items	Parameters
Max.build size	φ180*120mm
Laser Type	Fiber Laser
Laser power	300W*2
Optical scanning system	F-THETA lens, high-speed scanning galvanometer
Maximum scanning speed	7m/s
Beam Focus Diameter	40-50μm
layer thickness	20-100μm
Power supply	AC200-240V 5.75KW
Minimum oxygen content	≤100ppm
size	11938341866mm
Printing material	Pure Titanium, Titanium Alloy, Cobalt Chromium Alloy,Stainless Steel, High Temperature Alloy,etc.
Weight	600kg
Data format	STL file or other convertible standard formats
Software	Independent R&D

Plasma Polishing Machine NCL AP10
(, 下载次数: 22)

In the dynamic landscape of the dental industry, where the shift from labor-intensive to technology-intensive practices is evident, automation technologies are becoming increasingly essential. The integration of 3D printers has already proven successful in the production of dental pieces, particularly in the creation of partial dentures, crowns, and bridges.
After the 3D printing stage, achieving a high-quality finish is paramount. Traditional manual polishing methods often depend heavily on the skill and expertise of technicians, making standardization a challenging task. Recognizing this need, Chamlion has introduced the AP10 plasma polishing machine, specifically designed for dental laboratories, with a primary focus on polishing partial dentures.
(, 下载次数: 39)

1. Simple Operation: The AP10 is equipped with a user-friendly touch screen and a system that allows every user to easily operate and customize parameters according to specific needs.
2. Easy Adoption: The AP10 boasts a lightweight and compact design, featuring a separated transformer and polishing chamber. This ensures that it won't occupy excessive space in your laboratory, and its operation doesn't require air input.
3. Highly Efficient: The AP10 demonstrates remarkable efficiency, capable of polishing four pieces in just 10 minutes, all while minimizing loss and eliminating edge distortion.
4. Energy-Saving: With a power consumption of only 10KW, the AP10 stands out as an energy-efficient solution, contributing to sustainable and cost-effective operations.
5. Safe and Reliable: Prioritizing safety, the AP10 comes equipped with an automatic alarm device that is always on standby, providing an additional layer of security during operation.

(, 下载次数: 75)

△Before and after polishing

Items	Parameters
Polishing Tank Capacity	17L
Capacity	≤4pcs
Max. Polishing Power	10KW
Heating Power	3KW
Work Time	≤10min
Power Supply	3/N/PE AC 380(208)V 50/60HZ
Machine Size	650480890mm
Weight	230kg
Applicable Material	CoCr, Titanium alloy

More about Chamlion 铖联科技 https://panda3dp.com/3dprint-169817-1-1.html

欢迎光临 All Voice of China 3D Printing (https://www.panda3dp.com/)